The Automated Nucleic Acid Extraction Workstation SAW-48 (referred to as "SAW-48" below) produced by Jiangsu Bioperfectus Technologies Co., Ltd. is an in-vitro diagnostic medical device that integrates cutting-edge mechanical, electronic, and software technologies. SAW-48 integrates sample loading, nucleic acid purification, and PCR setup functions in one instrument. The typical run duration is less than 45 minutes for 1-48 samples. Based on experienced magnetic separation technology, SAW-48 provides high throughput automation combined with high performance. It will promote laboratory productivity to meet changing needs. With non-contact dispensing of samples, reagents, and PCR reagents, it will be safe and simple for the operators and save time and money for the laboratory.
Size (L x D x H) |
740 x 650 x 730(mm) |
Weight |
50kg |
Sample throughput |
1-48 |
Cooler control |
Keep 4 - 15 °C for the reagent station and 4 - 8 °C for the PCR setup station. |
Contamination control |
The nucleic acid extraction and solution dispensing operations are performed strictly in separate areas.A built-in medical purifier consists of two UV disinfection modules with a timer, two HEPA filters, and one high efficiency & high voltage electrostatic sorption particulate air filter with four fans. |
Voltage |
100-240 V AC |
Frequency |
50-60 Hz |
Rated power |
420 VA |
Sampling Function |
|
Compatible sample tube |
Sample tubes and centrifuge tubes, such as 1.5 ml tubes, 5 ml tubes, and tubes with 16mm diameter. |
Sample Types |
Plasma, serum, whole blood, swab, urine, etc. |
Extraction Function |
|
Magnetic bead recovery efficiency |
≥ 98% |
Processing volume |
20-1,000 μL |
Mixing mode |
Oscillating mixing with multiple modes and speeds (> 20 gears) |
Compatible kit |
Bioperfectus magnetic bead-based nucleic acid extraction kits |
Heating temperature |
Heating temperature for lysis: room temperature to 120°C |
Heating temperature for elution: room temperature to 120°C |
|
Pipetting Function |
|
Sample Loading Channels |
1-2 |
Reagent tube |
1.5 ml, 2 ml, 5 ml EP Tubes 0.2 ml PCR tube |
Dispensing volume of plunger pump |
1-250 μL |
Positional accuracy |
±0.1 mm on the X-Y-Z axis |
NMPA, CE, FDA Listed
I am interested in more information on the following Bioperfectus product
Fieids marked with an asterisk(*) are required