Nucleic Acid Extraction System SMPE-960


The nucleic acid extraction system (referred to as "extraction system" below) produced by Jiangsu Bioperfectus Technologies Co., Ltd. (referred to as "Bioperfectus" below) is an in vitro diagnostic medical device, which integrates cutting-edge mechanical, electronic and software technologies to enable automated extraction of nucleic acids from samples with a modular structure - the equipment can extract nucleic acids from 1-96 samples in three independently operating modules at the same time. Each module consists of 1-32 samples so that samples can be tested upon delivery.


The equipment is intended for use with magnetic bead-based nucleic acid extraction kits for extraction and purification of nucleic acids from clinical samples.

  • Test upon delivery: 1-96 samples in three independently operating modules for nucleic acid extraction at the same time
  • High efficiency: 15-45 minutes
  • Better interactive experience: 10.1’’ touch screen, user-friendly software to independently control each module
  • Better contamination control: UV light, ozone-free purifier with dozens of micro-sized high-voltage electrostatic subparts that can capture aerosols containing bacteria
  • Quality commitment: 18 months' warranty period


Sample Throughput


Efficiency of Magnetic Bead Recycle


Plate Type

96-deep-well plate

Processing Volume


Size (Width × Depth × Height)

600 x 450 x 640mm



Reagent Type

Extraction reagent with magnetic bead method

Mixing Mode

Oscillating mixing in a 96-well plate; multiple modes and speeds (> 20 gears)

Auxiliary Reagent

Bioperfectus Nucleic Acid Extraction Kit

Program Management

New build, edit, delete mode programs, free and flexibly edit extraction system

Heating Temperature

Room temperature to 120

Contamination Control

The nucleic acid extraction and sample/kit distribution are performed strictly in separate areas. The negative pressure filtration system with a built-in medical ozone-free purifier and dozens of micro-sized high-voltage electrostatic subparts can capture aerosols containing inactivated bacterial and viral debris in the air onto the filter media so that the pollutants will not be released into the air again





Rated Power   



NMPA, CE, FDA Listed